Hisense 32A5KQ User Manual

Connecting to External Devices
AirPlay is a source in Inputs. Press the / button on your remote control to select the AirPlay,
then select AirPlay and HomeKit Settings. You can also find AirPlay and HomeKit settings in system settings
on your TV.
How to use AirPlay:
1. Make sure your Apple device is connected to the same network as your TV.
2.
Locate the AirPlay icon on supported media apps, or the Screen Mirroring icon in Control Center on your
Apple device. Depending on the content, these steps may vary:
•
To mirror your deviceʼs screen, open Control Center and tap Screen Mirroring .
•
To stream audio from supported music or podcast apps, tap AirPlay audio .
•
To stream video from supported apps, tap AirPlay video .
3. Select your TV from the list to begin using AirPlay.
Note:
• An AirPlay-enabled TV.
• The TV and Apple devices are connected to the same network.
• The icon is only for reference. In some apps, you may have to tap another icon first.
• If an AirPlay passcode appears on your TV screen, enter the passcode on your Apple device to continue.
Using HomeKit
Use HomeKit to easily and securely control your TV using your Apple devices.
1. To set up HomeKit, open AirPlay and HomeKit settings on the TV. Locate the HomeKit section and select
'Set Up'.
2. The HomeKit setup screen will display a pairing QR code on the TV. Use your iPhone or iPad to scan the
QR code, then follow the on-screen directions to complete HomeKit setup.
Note:
• Available operations vary depending on the version of the app and software.
Connecting USB Devices
Connect USB devices, such as hard drives and USB memory sticks for browsing photos or listening to music.
Read before connecting USB devices
USB disk sizes 4GB, 8GB, 16GB, 32GB, 64GB, 128GB and other common market sizes are supported. Up to
8TB hard drives are supported.
Supported formats: NTFS, FAT32.
41

Hisense 32A5KQ Specifications

General

Operating system version	U6
Operating system installed	VIDAA
Hybrid Broadcast Broadband TV (HbbTV) version	2.0.3
Audio decoders	Dolby Digital, DTS, DTS Virtual:X, DTS-HD, Dolby MS12
RMS rated power	16 W
Number of speakers	2
Audio output channels	2.0 channels
Screen shape	Flat
Response time	9.5 ms
Display diagonal	32 \
Display brightness	200 cd/m²
Display technology	QLED
Native aspect ratio	16:9
Native refresh rate	60 Hz
LED backlighting type	Direct-LED
Contrast ratio (typical)	3000:1
Display diagonal (metric)	80 cm
Supported graphics resolutions	1920 x 1080 (HD 1080)
Motion interpolation technology	-
Audio formats supported	AAC, AC3, FLAC, M4A, MP3, OPUS, PCM, WAV, WMA
Image formats supported	BMP, GIF, JPEG, JPG, PNG
Video formats supported	ASF, AVI, FLV, H.264, H.265, HEVC, MKV, MOV, MP4, MPEG, MPEG1, MPEG2, MPEG4, MPG, TS, VOB, WMV, WMV3
High Dynamic Range (HDR) supported	No
HDMI version	1.4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Tuner type	Analog & digital
Digital signal format system	DVB-C, DVB-S2, DVB-T2
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Energy efficiency scale	A to G
Power consumption (max)	50 W
Power consumption (standby)	0.5 W
Power consumption (typical)	27 W
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Stand type	Legs stand
Product color	Black
Panel mounting interface	100 x 200 mm
Package type	Box
Package depth	114 mm
Package width	811 mm
Package height	515 mm
Package weight	5600 g
Repairability index	6

Weight and Dimensions

Stand width	617 mm
Depth (with stand)	179 mm
Width (with stand)	721 mm
Height (with stand)	452 mm
Weight (with stand)	3900 g
Depth (without stand)	73 mm
Height (without stand)	430 mm
Weight (without stand)	3800 g