●Print characters 4-32
4.9 Print characters
Ex. Dedicated character (Simple Chinese)
Lines and Message length (Characters)
Model type 1 line 2 lines 3 lines
RX2-B 60 char. × 1 line 30 char. × 2 lines 20 char. × 3 lines
RX2-S 120 char. × 1 line 60 char. × 2 lines 40 char. × 3 lines
*) RX2-S OP : Up to 5 lines
OP : Up to 1,000 characters
4.9.1 Print fixed characters
(1) Function
●Inputs the characters to be printed.
●The kinds of characters which can be input are defined for each character size. Moreover, there is an
appropriate inter-character space depending on the kind of character. (See “4.7.4 Set dot matrix,
inter-character space, and other parameters”.)
●There is an “Insert” mode and an “Overwrite” mode when inputting.
●“Duplicate” by selecting the start and end of the character string and “Paste” at an arbitrary position are
possible.
●The characters which can be set as dedicated characters are shown below.
For dedicated characters, single words are handled collectively at input and deletion.
● Inputting an Arabic character will move the cursor to the left.
● Use the Insert mode to input Arabic characters.
●There are no limits on the number of digits which can be input at one print item.
To Next Page
Loading...
Need help?
General
