Honda CRF450R 2012 Service Manual

r
J
MeaslJre rh e
damper rod length
with the 'inside'
jaws of 8 vermor
caliper.
FRONT WHEEL/SUSPENSION/STEERING
INSPECTION
Remove the steeri ng damper (page 14 -38),
Visuallv inspect the steering damper for wear or
damage.
Check the following :
- Damper case for d eformation or oil leakage
- Damper rod for bending or damage
Replace the damper case or damper rod if neces-
sary.
Fully extend and compress the damper rod by hand.
Re lease the damper rod then check that it extends
to its maximum length.
STANDARD ( ma x imum le ngth) :
117.55 - 118.35 mm (4.628 - 4.659 in)
Check the damper rod for smooth operation .
If the damper rod operation is not sm o oth , check
the damper rod for bends or damage.
If the damper rod does not extend to maximum , dis-
assemble the steer ing damper (page 14-40).
Check
the spherical bearings for wear or damage .
Move the spherical bearing with your f inger . The
SPHERICAL BEARI NG
spherical bearing should move smoothly and qui- L=D~A~M~P~E~R.:.:.R=O=D,-- ____ _ _ _ ____ ---"
etly.
Replace the spherical bearing if it does not move
smooth ly or quietly .
Install the steering damper (page 14- 38 ).
SPHERICAL BEARING REPLACEMENT
Remove the steering damper (page 14- 38 ).
Remove the stopper ring.
Press
the spherical bearing ou t of the
mou nts.
damper
SPHERICAL BEARING
14-39

Honda CRF450R 2012 Specifications

General

Brand	Honda
Model	CRF450R 2012
Category	Motorcycle
Language	English