Honda EM4000SX User Manual

36
OPERATION
Voltage Selector Switch
The power available to each receptacle depends on the position of the
voltage selector switch.
120V ONLY Position
When the voltage selector switch is in the 120V ONLY position, you do
not need to spread the load over the receptacles. You must, however,
make sure the load on any receptacle does not exceed its available
power shown in the table above and the total load does not exceed
the total current available.
Total Current Available:
30.0 A (EM4000SX)
37.5 A (EM5000SX)
45.8 A (EM6500SX)
Switch
Position
Receptacle
Available Power
EM4000SX EM5000SX EM6500SX
120V ONLY
①
30A at 120V 30A at 120V 30A at 120V
②
20A at 120V 20A at 120V 20A at 120V
③
20A at 120V 20A at 120V 20A at 120V
20A at 120V 30A at 120V 30A at 120V
None None None
120V/240V
①
15.0A at 120V 18.8A at 120V 22.9A at 120V
②
15.0A at 120V 18.8A at 120V 20A at 120V
③
15.0A at 120V 18.8A at 120V 20A at 120V
-
15.0A at 240V 18.8A at 240V 22.9A at 240V
31Z236120.book 36 ページ ２０１５年１２月１０日 木曜日 午前１１時４３分

Honda EM4000SX Specifications

General

Brand	Honda
Model	EM4000SX
Category	Inverter
Language	English