68
TRANSPORTING
Do not lay the generator on its side when moving, storing, or
operating it. Oil or fuel may leak and damage the engine or your
property.
If the generator has been running, allow the engine to cool for at least
15 minutes before loading the generator on the transport vehicle. A
hot engine and exhaust system can burn you and can ignite some
materials.
Keep the generator level when transporting to reduce the possibility
of fuel leakage. Move the fuel valve lever to the OFF position. Do not
use the generator while it is being transported.
When using ropes or tie-down straps to secure the generator for
transportation, be sure to only use the frame bars as attachment
points. Do not fasten ropes or straps to any portions of the generator
body.
31Z236120.book 68 ページ ２０１５年１２月１０日 木曜日 午前１１時４３分
To Next Page
Loading...
Need help?
General
