38
OPERATION
DC OPERATION
The DC receptacle should ONLY be used for charging 12-volt
automotive type batteries. The DC charging output is not regulated.
Connecting the battery charging cable (optional equipment):
1. Before connecting the battery charging cable (optional equipment) to
a battery that is installed in a vehicle, disconnect the vehicle battery
ground cable from the negative (–) battery terminal.
WARNING: Battery posts, terminals, and related accessories contain
lead and lead components. Wash hands after handling.
2. Connect the red lead of battery charging cable into the positive (+)
DC terminal of the generator.
The battery gives off explosive
hydrogen gas during normal
operation.
A spark or flame can cause the
battery to explode with enough
force to kill or seriously hurt you.
Wear protective clothing and a face
shield, or have a skilled mechanic
perform the battery maintenance.
POSITIVE DC TERMINAL
(RED)
NEGATIVE DC TERMINAL
(BLACK)
BATTERY NEGATIVE
(–) TERMINAL
BATTERY POSITIVE
(+) TERMINAL
31Z236120.book 38 ページ ２０１５年１２月１０日 木曜日 午前１１時４３分
To Next Page
Loading...
Need help?
General
