62
SERVICING YOUR GENERATOR
FUSE
If the fuse is blown, the starter motor won’t operate.
In the event of fuse failure, locate the cause of failure and repair it
before you continue operation. If the fuse continues to fail,
discontinue generator use and consult an authorized Honda generator
dealer.
1. Turn the engine switch to the OFF position and remove the key
before checking or replacing the fuse.
2. Remove the fuse holder cover
and pull the fuse out.
3. Replace the fuse with a fuse of
the same type and rating.
Specified fuse: 20 A
Never use a fuse with a
different rating from that
specified. Serious damage to
the electrical system or fire
may result.
4. Install the fuse holder cover in the reverse order of removal.
FUSE (20 A)
FUSE HOLDER COVER
31Z236120.book 62 ページ ２０１５年１２月１０日 木曜日 午前１１時４３分
To Next Page
Loading...
Need help?
General
