To enter the customizing mode,
press and hold the INFO button for
more than 3 seconds. Then select
‘‘DEFAULT ALL’’ by pressing the
INFO button.
To set the default settings, select
‘‘OK’’ by pressing the INFO button,
then press the SEL/RESET button.
When ‘‘DEFAULT ALL’’ is
completed successfully, you will see
the above display for several seconds,
and the display will return to
‘‘CUSTOMIZE ENTRY.’’
Press the SEL/RESET button to
enter ‘‘DEFAULT ALL.’’
DEFAULT ALL
Multi-Information Display
104
０９／０４／１０ １６：１３：４１ ３１ＳＨＪ６５０ ０１０９
To Next Page
Loading...
Need help?
General
