Check the smaller fuses in the
under-hood fuse box and all the
fuses in the interior fuse boxes by
pulling out each fuse with the fuse
puller provided in the primary
under-hood fuse box.
Turn the ignition switch to the
LOCK (0) position. Make sure the
headlights and all other
accessories are off.
Check each of the large fuses in
the primary under-hood fuse box
by looking through the top at the
wire inside. Removing these fuses
requires a Phillips-head
screwdriver.
If something electrical in your
vehicle stops working, the first thing
youshouldcheckforisablownfuse.
Determine from the chart on pages
through , or the diagram on
thefuseboxlid,whichfuseorfuses
control that device. The diagram for
theinteriordriver’ssidefuseboxis
on the kick panel below the fuse box.
Check those fuses first, but check all
the fuses before deciding that a
blown fuse is the cause. Replace any
blown fuses, and check if the device
works.
Remove the cover from the fuse
box.
1.
2.
3. 4.
483 485
CONTINUED
Checking and Replacing Fuses
Fuses
Taking Care of the Unexpected
481
FUSE
BLOWN
FUSE PULLER
０９／０４／１０ １７：０３：４９ ３１ＳＨＪ６５０ ０４８６
To Next Page
Loading...
Need help?
General
