−
＋
−
＞
If the text data has more than 16
characters, you will see the first 15
characters and the indicator in
the display. Press and hold the DISP
button until the next 16 characters
are shown. You can see up to 31
characters of the text data.
IfyoupressandholdtheDISP
button again, the display shows the
first 16 characters again.
If any letter is not available, it is
replaced with ‘‘ . ’’ (dot) in the display.
When the disc has no text data, you
will see ‘‘NO INFO’’ on the display.
You will also see some text data
under these conditions:
When a new folder, file, or track is
selected.
When you change the audio mode
to play a disc with text data or in
MP3 or WMA.
When you insert a disc, and the
system begins to play.
When playing a CD-DA with text
data, the album and track name are
showninthedisplay.Withadiscin
MP3 or WMA, the display shows the
folder and file name.
When you turn on the audio system
next time, the system keeps your
selection with the DISP button.
Each time you press and
release the SKIP bar, the player
skips forward to the beginning of the
next track (file in MP3 or WMA
mode). Press and release the
SKIPbartoskipbackwardtothe
beginning of the current track. Press
itagaintoskiptothebeginningof
the previous track.
To move rapidly within a track, press
andholdthe or SKIPbar.
You can use the SKIP bar while a
disc is playing to select passages and
change tracks (files in MP3/WMA
mode).
CONTINUED
Playing a Disc (LX and Canadian DX models)
To Change or Select Tracks/Files
SKIP
Features
229
０９／０４／１０ １６：３０：００ ３１ＳＨＪ６５０ ０２３４
To Next Page
Loading...
Need help?
General
