(1)
(1) fuel valve
(2) ignition switch
(2)
(3)
(4)
(3) neutral indicator
(4) engine stop switch
104
Preparation
Basic Operation & Riding
Starting & Stopping the Engine
Always follow the proper starting procedure described below.
For your safety, avoid starting or operating the engine in an enclosed
area such as a garage. Your ATV’s exhaust contains poisonous carbon
monoxide gas which can collect rapidly in an enclosed area and cause
illness or death.
Before starting, select a level surface and lock the parking brake
(page ).
Confirm the following:
The transmission is in neutral, and the neutral indicator ( ) is ON.
The engine stop switch ( ) is set to RUN ( ).
Turn the fuel valve ( ) and ignition switch ( ) to ON ( ).
1.
2. 1
4
2
45
3
０９／０５／１８ １０：０７：２３ ３１ＨＮ２６９０ ０１１３
To Next Page
Loading...
Need help?
General
