(5)
(1) GPS/WP button
(2) waypoint number
(3) plus button
(4) minus button
(5) waypoint distance
(2) (4)
(3)
(1)
71
Basic Waypoint Selection
GPS Mode
GPScape System
To Mark Your Present Position:
Press and hold the GPS/WP button for about 2 seconds, until the
waypoint number and waypoint distance ( ) flash. Then release the
button.
To select a higher waypoint number ( ), press and release the plus
button ( ).
To select a lower waypoint number, press and release the minus
button ( ).
To fast scroll, press and hold the plus or minus button until the
desired waypoint number appears.
Use the GPS/WP button ( ) to select the GPS mode (page ).
Turn the ignition switch ON ( ).
There are two methods for marking waypoints.
Basic (to select your current position)
Advanced (to input desired destinations)
(cont’d)
1.
2.
3.
4.
1
2
66
3
4
5
０９／０５／１８ １０：０２：０２ ３１ＨＮ２６９０ ００８０
To Next Page
Loading...
Need help?
General
