Honeywell Home TUXEDOW Installation And Setup Guide

TUXEDOW INSTALLATION AND SETUP GUIDE
26
TC Server Info
The TC Server Info screen provides a diagnostic icon that, when touched, tests the path to the different Total Connect servers.
It houses the TC icon that will allow you to enable or disable Z-Wave devices from showing up on Total Connect.
ICON
ACTION
NOTES
1. From the Home screen, touch the Setup, System Setup and
CS Setup icons.
2. Enter Authorized Installer Code.
3. Touch the TC Server Info icon.
4. Touch Diagnostics
to test each server path.
5. Touch the TC icon to view the list of enrolled Z-
Wave devices.
This is where you can enable or disable devices from
showing up on Total Connect 2.0 (see notes for total number
of devices Total Connect 2.0 supports).
6. Touch to go back to the CS Setup Screen or to exit.
• On Total Connect, the maximum number
of supported devices is 40 switches
(including Water Valves), 3 thermostats,
4 door locks and 3 Garage Door
Controllers.
• TUXEDOW supports 232 devices
(including the TUXEDOW keypads) in the
Z-Wave network.
User Setup
User Setup allows you to Add a User, Delete a User, and Edit a User. You may access User Setup from the System Setup
screen. Each user must be assigned a name with a corresponding 4-digit user code to gain access to various features and
functions. The maximum number of Users that can be added is limited to the number of users that the control panel supports.
Users for the system are programmed in a central user setup location that provides the specific questions for authorization
levels assigned to different users. You may want these users to be the same, but there are situations in which you may want a
user to have limited capabilities. These capabilities are defined by the Authority Level assigned each user.
Authority Levels
Authority levels define the system functions a particular user can perform. Depending on the authority assigned to you, there
are certain system functions you may be prohibited from performing. The following information describes the authority levels
that can be assigned through the keypad and provides the equivalent authority level name found in your alarm system
manuals. The authority levels that can be assigned are as follows:
Authority
Level
Functions
Equivalent System Name
Residential Systems
Commercial
Systems
Master
Can perform all security functions, add/delete users in
assigned partition, program scheduled events, and
change partition master code
Partition Master
Level 1 Master
Normal
Perform security functions (arm, disarm)
Standard User
Level 3 Operator A
Guest
Can arm the system in assigned partitions but cannot
disarm the system unless the system was armed with
this code.
Note: Do not assign this level if Quick Arm is enabled in
your system.
Guest
Level 4 Operator B
No Access
Used to restrict access from a partition.
N/A
N/A

Honeywell Home TUXEDOW Specifications

General

Brand	Honeywell Home
Model	TUXEDOW
Category	Security System
Language	English