Ultra HD IP Camera User Guide
22
Event Snapshots are taken whenever an alarm, motion detection, camera tampering, or
system event occurs.
Image Size
The image size is determined by the main stream resolution setting. It is not configurable.
(See Resolution on page 21).
Quality
Set the Quality to a value between 1 (lowest) and 6 (highest).
Interval
Select a snapshot frequency between 1 snapshot per second (1s) and 7 snapshots per
second (7s), or click Customized to define a custom setting between 1 and 50,000 seconds.
Click Save to apply the settings.
Configuring Privacy Masks
You can configure privacy mask properties on the Setup > Compression Setup > Overlay >
Privacy Masking page.
To enable privacy masking, click Enable. Four privacy masks appear in the preview window.
Delete any masks that you don’t need. To delete a mask, right-click it or select it and then
click Delete. To remove all the masks, click Remove All.
To move a mask, select it and drag the center of the mask.
To Next Page
Loading...
Need help?
General
