Configuring Event Settings
49
8. To send an email notification when an alarm event is detected, select the Send Email
check box. Email settings must be configured in Setup > Network Setup > SMTP
(Email). See Configuring Email Settings on page 35.
9. To take a snapshot when an alarm event is detected, ensure that the Snapshot check
box is selected.
Note For the snapshot to be attached to the email notification, the Attachment
check box must be selected in Setup > Network Setup > SMTP (Email).
See Configuring Email Settings on page 35.
10. Click Save to apply the settings.
Configuring Audio Events
You can configure audio event settings on the Setup > Video Analytics > Audio Detection
page.
To enable audio event detection:
1. To detect faults in the audio input, select the Enable Input Abnormality check box.
2. To detect unusual changes in the audio input:
a. Select the Enable Intensity Change check box.
To Next Page
Loading...
Need help?
General
