Honeywell PD45 User Manual

PD45 User Guide 75
Display Settings
To view these settings:
• From the printer Main Menu, select Settings > System Settings > Display
• From the printer web page, click Configure > System Settings > Display
System I/O
To view these settings:
• From the printer Main Menu, select Settings > System Settings > Manage I/O.
• From the printer web page, click Configure > System Settings > Manage I/O.
Display Setting Description Default
Brightness Selects the brightness of the printer screen. Low
Idle Information Selects the information that appears on the printer screen
when it is in Idle mode.
IPv4 address
Time Format Selects the format used to display time on the printer. 24 Hour
Date Format Selects the format used to display date on the printer. dd/mm/yyyy
Menu Access Determines if the Menu button on the printer web page is
accessible.
Enable
PIN Sets the password that allows access to the Menu button on
the printer web page, if the Menu Access parameter is set to
Enable With PIN. Range is 4 to 16 characters.
1234
Screen Timeout Selects how long the printer screen stays on before the
screen saver starts.
Disable
Feed Key Access Determines if the Feed button on the printer keypad is
enabled or disabled.
Enable
Information
Access
Determines if the information bar on the Main Menu is
accessible.
Enable
System I/O
Setting
Description Default
Ethernet Determines if the printer is allowed to communicate using Ethernet
communications.
Enable
Wireless 802.11 Determines if the printer is allowed to communicate using its 802.11
radio. Supported only if the optional Wi-Fi module is installed.
Enable

Honeywell PD45 Specifications

General

Brand	Honeywell
Model	PD45
Category	Printer
Language	English