Honeywell PD45 User Manual

76 PD45 User Guide
System Network Services
Note: You will only see Manage Services from the menus if you have an Ethernet or
Wireless module installed in the printer.
Note: The printer supports 10/100 Mbps Ethernet (10BASE-T, 100BASE-T)
To view these services:
• From the printer Main Menu, select Settings > System Settings > Manage
Services.
• From the printer web page, go to Configure > System Settings > Manage
Services.
System
Network
Service Setting
Description Default
Web Server Determines if the web server is enabled in the printer. Enable
FTP Determines if the printer can use File Transfer Protocol. Disable
SFTP Determines if the printer can use Secure File Transfer Protocol Enable
Net1 Determines if the printer can use Telnet to communicate with
Fingerprint.
Enable
SNMP Determines if the printer can use SNMP. Enable
LPR Determines if the printer can use the line printer server (LPR)
daemon.
Enable
IKEv2 Determines if the printer can use IKEv2. Disable
SSH Determines if the printer can use Secure Socket Handling (SSH). Disable
Telnet Determines if the printer can use Telnet. Disable
XML Determines if the printer can use XML printing. Enable
Time Server Determines if the printer uses the Network Time Protocol (NTP) to
synchronize its time with a network time server. The default Server
Address is ntp0.cornell.edu, and the default Port Number is 123.
Disable
Device
Management
Determines if the printer can use 9300 TCP/IP port to
communicate with HCD.
Enable
Connectivity
Agent
Determines if the printer can communicate with Honeywell Cloud
on port 10000.
Disable

Honeywell PD45 Specifications

General

Brand	Honeywell
Model	PD45
Category	Printer
Language	English