18 796689 (4188-658) i2_04/07
Fault condition
To Cancel buzzer
Cancel Buzzer
Typical fault indications:
A fault condition is an automatic detection of
faults in the system requiring attention.
A fault detected in the fire alarm system is
given at the panel in the form of light
indication(s) and text message(s) on the
display, accompanied with an audible sound
from the local buzzer.
The table below shows individual
fault and associated message.
The panel will notify multiple faults
and disablements.
To silence the panel buzzer while the
system is in fault condition:
Press the Cancel Buzzer button.
Any fault repair on the system
must be carried out by the
servicing organisation.
Light indication
typical
message(s)
meaning
Fault
One example:
Loop device
removed
A device on the loop
circuit has been
removed.
Fault
FRE Fault
Fire routing
output O/C or
S/C fault
There is an open or
short circuit fault
associated with the
fire routing output.
To Next Page
Loading...
Need help?
General
