Honeywell System 800 User Manual

796689 (4188-658) i2__04/07 3
System set up 23
Hardware link 23
To enable or disable a zone 24
To edit a zone label 25
To put a zone in and out of test mode 26
To view devices in a zone 27
To enable or disable a device 28
To edit a device label 29
To enable or disable alarm sounders 30
To set up weekly reminder of fire test 31
To set up the Initial and Verify delay 32
Other controls 33
Loop status 33
Local input 33
Loop map 33
Auxiliary relay 34
Fire routing output 34
Fault routing output 34
Maintenance reminder 34
Appendix 35
Glossary of terms 35
Description of Controls and Indicators36
Controls at the system 800 panel 37
Indicators at the system 800 panel 38
Menu 43
Controls and indicators 43

Honeywell System 800 Specifications

General

Brand	Honeywell
Model	System 800
Category	Fire Alarms
Language	English