796689 (4188-658) i2__04/07 5
General description
The system 800 fire alarm panel is designed
to meet the requirements of EN54 Parts 2
and 4. It is suitable for installation in small to
medium size buildings in accordance with
the recommendations of BS5839:Part 1, to
provide an automatic fire detection and
alarm.
The system 800 panel is installed and
configured to monitor devices such as
detectors, manual call points and sounder
control transponder units connected on a
single loop. Each device is capable of being
addressed individually and may be assigned
to one of 24 zones. The devices and zones
in the system can each be given a label for
identification. In the event of a fire the panel
automatically operates external sounder
circuits to raise an alarm in the protected
buildings.
The push button controls on the panel are
for use by authorised and trained personal.
To comply with the requirements of
BS5839:Part 1, there are log sheets
provided at the back of this manual for
recording system events.
To Next Page
Loading...
Need help?
General
