EasyManuals Logo
Home>HP>Switch>2920 Series

HP 2920 Series User Manual

HP 2920 Series
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
Configuring Fast-Leave IGMP
Enables igmp fast-leaves on the specified ports in the selected VLAN. The no form of the command
disables igmp fast-leave on the specified ports in the selected VLAN. (Default: Enabled.)
Syntax:
[no] vlan <vid> ip igmp fastleave <port-list>
Configuring Forced Fast-Leave IGMP
Enables IGMP Forced Fast-Leave on the specified ports in the selected VLAN, even if they are
cascaded. (Default: Disabled.) The no form of the command disables Forced Fast-Leave on the
specified ports in the selected VLAN.
Syntax:
[no] vlan <vid> ip igmp forcedfastleave <port-list>
Configuring Static Multicast Groups
Creates the IGMP static group <group-address> on the selected VLAN. The no form of the command
deletes the static group from the selected VLAN.
Syntax:
[no] vlan <vid> ip igmp static-group <group-address>
Show Commands
These CLI commands allow the user to configure IGMP.
Viewing the current IGMP configuration and status
Syntax:
show ip igmp [vlan <vid>]
Displays IGMP status for all VLANs with IGMP enabled on the switch unless a
specified VLAN has been given.
Example: show ip igmp
IGMP Service Protocol Info
Total VLANs with IGMP enabled: 33
Current count of Multicast groups joined: 21
VLAN ID: 1
VLAN Name: DEFAULT_VLAN
IGMP Version: 2
Querier Address [this switch]: 10.0.102.221
Querier Up Time: 1hr 53min 2sec
Querier Expiry Time: 2min 1sec
Ports with multicast routers: A1, A3-A5
Active Group Addresses |Type| Expires | Ports | Reports | queries |
--------------------------------+----+--------------------------------
xxx.xxx.xxx.xxx |filt| 1min 2sec | A1 | 20 | 20 |
xxx.xxx.xxx.xxx |std | 3min 2sec | all
xxx.xxx.xxx.xxx |filt| 23min 3sec | A1-B3, C4 | 20 | 20 |
xxx.xxx.xxx.xxx |filt| 23min 10sec| A1,B2,C5 | 20 | 20 |
xxx.xxx.xxx.xxx |filt| 2min 5sec | F22 | 20 | 20 |
xxx.xxx.xxx.xxx |stat| 0min 0sec | all | 20 | 20 |
Active Group Addresses |Type| Expires | Ports
----------------------------+----+--------------------------------
xxx.xxx.xxx.xxx |filt| 1min 2sec | A1
28 Multimedia Traffic Control with IP Multicast (IGMP) v2 NG

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 2920 Series and is the answer not in the manual?

HP 2920 Series Specifications

General IconGeneral
BrandHP
Model2920 Series
CategorySwitch
LanguageEnglish

Related product manuals