Configuring the console switch 36
2.
Select either Restore Appliance Configuration or Restore Appliance User Database. The Restore
Appliance Configuration or Restore Appliance User Database page appears.
3. Select the type and location of the file you want to restore:
o Filesystem
o TFTP
o FTP
o HTTP
4. Enter the Decryption Password. The file is uploaded to the console switch.
5. Reboot the console switch ("Appliance tools" on page 33) to enable the restored configuration.
Viewing system information
1. Select Unit View>Appliance>Properties>Identity. The following properties appear:
o Part number
o Serial number
o EID
NOTE: HP recommends completing the Location information for the appliance, so that all
appliances can be logically organized in the software.
2. Select Unit View>Appliance>Properties>Location. The following properties appear:
o Site
o Department
o Location
3. Select Unit View>Appliance Settings>Versions to view the current firmware version. The current
firmware version is listed under the Application Version. The larger the version number, the more
current the firmware.
System alerts
In the top right-hand header of the interface, any current system alert appears.
The following alerts might appear:
• Power supply failure
• Elevated ambient temperature
• Fan failure
To Next Page
Loading...
Need help?
General
