Local port operation 35
If the server list changed since it was last displayed, the mouse cursor turns into an hourglass as the list
automatically updates. No mouse or keyboard input is accepted until the list update completes.
Assigning names to servers
1. From the Names dialog box ("Accessing the Names dialog box" on page 34), select the name or port
number and click Modify. The Name Modify dialog box appears.
2. In the New Name field, enter a name. Names can be 1 to 15 characters in length. Permitted
characters are case-sensitive and can consist of A–Z, 0–9, spaces, and hyphens.
3. Click OK to transfer the new name to the Names dialog box.
4. Repeat steps the previous steps for each server in the system.
5. Choose one of the following options:
o Click OK to save settings.
o Click X to exit, or press the Esc key to exit without saving settings.
Changes made in the Name Modify dialog box are not saved until you click OK in the Names dialog box.
Changing the keyboard language
You can select the language for all USB Interface Adapters connected to the console switch.