HP G3 KVM User Manual

Local port operation 36
Accessing the Keyboard dialog box
From the Main dialog box ("Accessing the Main dialog box" on page 22), click Setup>Keyboard. The
Keyboard dialog box appears.
Selecting the keyboard language
1. From the Keyboard dialog box ("Accessing the Keyboard dialog box" on page 36), select the
keyboard country code. A Keyboard Warning appears.
2. Click OK.
Setting up a scan pattern
In Scan mode ("Activating Scan mode" on page 38), the HPE G3 KVM Console Switch automatically
scans port to port (server to server).You can select up to 16 servers from a list of all servers attached to
the HPE G3 KVM Console Switch. You can display the list by either server name or EID number by
clicking the appropriate button. Selecting the checkbox beside each server to be added to the scan list
creates the scan list. The creation of a scan list does not start Scan mode. You must enable Scan mode
through the Scan Enable checkbox on the Commands dialog box ("Accessing the Commands dialog box"
on page 40).

HP G3 KVM Specifications

General

Brand	HP
Model	G3 KVM
Category	Switch
Language	English