The Registration page is displayed.
2. Select Connect this server through an HPE remote support host server.
3. Enter the Host server hostname or IP address and Port number.
The default port is 7906.
4. Click Register.
iLO notifies you that the registration process is finished.
5. Optional: Send a test event to confirm the connection between iLO and HPE remote support.
6. Optional: To receive email alerts about system events, configure AlertMail.
More information
Prerequisites for remote support registration on page 184
Unregistering from Insight Online direct connect
Prerequisites
Configure iLO Settings privilege.
Procedure
1. Click Remote Support in the navigation tree.
2. Click Unregister.
3. When prompted to confirm the request, click OK.
iLO notifies you that the server is no longer registered.
Unregistering from Insight Remote Support central
connect
Procedure
1. Log in to the Insight RS Console.
2. Do one of the following:
• To stop monitoring a server temporarily, select the server on the Devices > Device Summary tab
in the Insight RS Console, and then select ACTIONS > DISABLE SELECTED.
Unregistering a server directly from the iLO web interface is the same as temporarily disabling the
server in the Insight RS Console.
• To stop monitoring a server permanently, delete the server from the Insight RS Console. To delete
the server, select it on the Device Summary tab, and then select ACTIONS > DELETE
SELECTED.
3. Click Remote Support in the navigation tree.
192 Unregistering from Insight Online direct connect
To Next Page
Loading...
Need help?
General