Viewing your changes before you click Apply might reset the Runtime Parameters dialog box,
causing your edits to be lost.
7. Start the browser and log in to iLO.
8. Start the Java IRC again.
iLO .NET IRC sends characters continuously after switching windows
Symptom
When you switch to a different window, the .NET IRC sends characters continuously.
Cause
If you press a key during a .NET IRC session, and you switch windows, the key might remain pressed in
the session. This situation causes the character to repeat continuously.
Action
Bring the Remote Console window to the front of your desktop by clicking the .NET IRC window.
iLO Java IRC displays incorrect floppy and USB key device information
Symptom
When the Firefox browser is used, the Java IRC might display incorrect floppy drive and USB key device
information.
Cause
The client OS or Java software might be out of date.
Action
1. Make sure that Red Hat Enterprise Linux 6 or later is installed on the local client system.
2. Install the latest version of Java and configure it to connect through the Firefox browser.
3. Log in to the iLO web interface.
4. Insert a USB key or floppy disk on the local client system.
5. Verify that you can access the USB key or floppy disk.
6. Open a Java IRC session.
7. Select Virtual Drives > Image File Removable Media.
The Choose Disk Image File dialog box opens.
8. Type or select the path of the USB key or floppy disk (/dev/disk) inserted in the client.
You can also mount the USB key or floppy disk by label.
9. Click OK.
384 iLO .NET IRC sends characters continuously after switching windows
To Next Page
Loading...
Need help?
General