2. Test the directory settings.
a. Select one or more iLO systems
b. In the Directory Test Controls section, enter the following:
• Directory Administrator Distinguished Name and Directory Administrator Password—
Searches the directory for iLO objects, roles, and search contexts. This user must have the right
to read the directory.
Hewlett Packard Enterprise recommends that you use the same credentials that you used when
creating the iLO objects in the directory. iLO does not store these credentials; they are used to
verify the iLO object and user search contexts.
• Test User Name and Test User Password—Tests login and access rights to iLO. This name
does not need to be fully distinguished because user search contexts can be applied. This user
must be associated with a role for this iLO.
Typically, this account is used to access the iLO processor being tested. It can be the directory
administrator account, but the tests cannot verify user authentication with a superuser account.
iLO does not store these credentials.
c. Click Start Test.
Several tests begin in the background. The first test is a network ping of the directory user by
establishing an SSL connection to the server and evaluating user privileges.
3. To view the individual test results, double-click an iLO system.
348 Kerberos authentication and Directory services
To Next Page
Loading...
Need help?
General