3-4
Setup Network
System Time Pages
System Time Pages
You click Setup Network > System Time to display the web pages for configuring the system clock, SNTP
client functionality, system time zone, and daylight saving time settings.
Time Zone Summary
The Time Zone Summary page displays the current time, time zone, and Daylight Saving Time settings, and
enables you to configure the time display format. To display the Time Zone Summary page, click Setup Network
> System Time in the navigation bar and ensure that the Clock tab is selected.
Figure 3-2. Time Zone Summary Page
Table 3-2. Time Zone Summary Fields
Field Description
Current Time
Time The current time. This value is determined by an SNTP server. When SNTP is disabled, the
system time increments from 00:00:00, 1 Jan 1970, which is set at bootup.
Date The current date.
Time Source The source from which the time and date is obtained:
• SNTP—The time has been acquired from an SNTP server.
• No Time Source—The time has been either manually configured or not configured at
all. This is the default selection.
Time Format Select 24 Hour (“military” time) or 12 Hour (the default) to specify the time display format.
Time Zone
Time Zone The currently set time zone. The default is (GMT) Greenwich Mean Time: Dublin,
Edinburgh, Lisbon, London.
Acronym The acronym for the time zone, if one is configured on the system (e.g., PST, EDT).
To Next Page
Loading...
Need help?
General
