5. From the time period list, select one for Auto-O inactivity time and then click OK.
6. Click Yes when prompted.
Auto-O is enabled.
To manually enable Auto-O from the printer control panel
1.
On the printer control panel, press the Home button ( ) to display the Home screen.
2. Select Setup, Printer Settings, and then Power Management.
To select a function on a screen, use the arrow button or to select it, and then press the OK button.
3. Select Auto-O.
4. Choose an inactivity time period from the list, and then press OK.
A message shows up, prompting you whether to always enable Auto-O.
5. Select Yes by pressing OK.
Quiet Mode
Quiet Mode slows down printing to reduce noise while keeping print quality. It only works for printing with
normal print quality on plain paper. To return to normal printing speed, turn Quiet Mode o. This mode is o
by default.
NOTE: Quiet Mode does not work if you print photos or envelopes.
To turn on Quiet Mode from the printer control panel
1.
On the printer control panel, press the Home button ( ) to display the Home screen.
2. Select Setup, and then Printer Settings.
To select a function on a screen, use the arrow button ( , ) to select it, and then press the OK button.
3. Choose On for Quiet Mode.
To turn Quiet Mode on or o from the printer software (Windows)
1. Open the HP printer software. For more information, see Open the HP printer software (Windows).
2. Click Quiet Mode from the toolbar.
3. Select On or O, and then click Save Setting.
4. Click OK.
To turn Quiet Mode on or o from the printer software (OS X)
1. Open HP Utility as described in HP Utility (OS X).
2. Select the printer.
3. Click Quiet Mode.
4. Select On or O.
5. Click Apply Now.
4 Chapter 2 Get started ENWW
To Next Page
Loading...
Need help?
General
Weight and Dimensions
