6 Getting Started (features vary by model)
Connecting analog speakers
(Sold separately)
To connect active external speakers, such as left/right stereo speakers or a 2.1 system of two
speakers and a subwoofer, to the computer:
1 Make sure the speaker system is turned off and unplugged.
2 For 2.0 powered speakers, connect the speaker cable to the Audio Line Out connector
on the back of the computer.
Or
For 2.1 powered speakers, connect the Audio Line Out connector on the back
of the computer to the subwoofer, and then connect the left and right speakers
to the subwoofer.
3 Turn on the speaker system. If necessary, refer to the documentation that came
with your speakers.
Connecting headphones
(Sold separately)
Your computer comes with a headphones connector on the side of the computer.
The headphones connector is labeled with a headphones icon.
When headphones are plugged in, the sound to the internal speakers and
the external speakers (if attached) is muted.
Connecting a microphone
(Sold separately)
Your computer comes with a built-in microphone, next to the webcam on the front of the
computer.
There is also a microphone connector on the side of the computer.
Connect an external microphone to the microphone connector on the
computer.
To select the microphone or adjust the volume, see “Selecting the microphone” on
page 7.
NOTE: When an Audio Line Out or headphone device is connected, the internal speakers
are muted.
To Next Page
Loading...
Need help?
General