3.
Use the arrow keys to select a language, and then press the enter key.
4. When a confirmation prompt with your language selected is displayed, press the enter key.
5.
To save your change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press the enter key.
Changes goes into effect immediately.
Navigating and selecting in Setup Utility
Because Setup Utility is not Windows-based, it does not support the TouchPad. Navigation and
selection are by keystroke.
To navigate Setup Utility:
●
Use the arrow keys to choose a menu or a menu item.
●
Use either the arrow keys or the f5 or f6 keys to choose an item in a list or to toggle a field,
for example an Enable/Disable field.
●
Press the enter key to select an item.
●
Press the esc key to close a text box or return to the menu display.
●
Press the f1 key to display additional navigation and selection information.
Displaying system information
Use Setup Utility to view the system time and date and information that identifies the computer.
To display the system information using Setup Utility:
NOTE: If Setup Utility is running, begin at step 1. If Setup Utility is not running, begin at step 2.
1. Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for
Startup Menu screen appears, press the f10 key.
– or –
Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for
Startup Menu screen appears, press the esc key. When the Startup Menu appears, press the f10
key.
2. Select the Main menu.
3. To exit Setup Utility without changing any settings, use the arrow keys to select Exit > Exit
Discarding Changes, and then press the enter key.
Restoring default settings in Setup Utility
To restore Setup Utility default settings:
88 Chapter 5 Setup Utility (BIOS) ENWW
To Next Page
Loading...
Need help?
General