Hardware Options and Upgrades
Startup and Reference Guide—Part 2 8–11
Removing Digital Media
To remove a Digital Media card:
1. Complete all activities that are supported by the card (such as
a data transfer) and close all applications.
2. Push the card in until it is released 1.
3. Pull the card out of the slot 2.
Releasing and removing a digital media card
Disabling or Restarting Digital Media
An inserted Digital Media card uses power even when the card is
not in use. Disabling the card conserves power.
To disable an inserted Digital Media card, double-click the My
Computer icon on the Windows Desktop, right-click the drive
assigned to the card, then select Eject. (The card is stopped but is
not released from the Digital Media Card slot.)
To restart the card, remove, then reinsert, the card. For
instructions, refer to “Inserting Digital Media” and “Removing
Digital Media” in this chapter.
Ryan Masterfile.book Page 11 Monday, June 9, 2003 2:33 PM
To Next Page
Loading...
Need help?
General