Startup
Startup and Reference Guide—Part 1 1–7
Turning On the Notebook
To turn on the notebook, press the power button. When the
notebook turns on, the power/standby button lights up, the
power/standby light turns on, and you are prompted to begin
software setup.
Turning on the notebook
If the Notebook Does Not Turn On
■ Make sure that the AC adapter is securely plugged into an
electrical outlet.
■ Make sure that the outlet is providing power. (To confirm that
the outlet is providing power, plug another device into the
outlet.)
■ If you have installed a battery pack, make sure that the battery
pack is firmly seated.
■ Refer to the Worldwide Telephone Numbers booklet included
with the notebook to contact an HP Customer Care Center.
Ryan Masterfile.book Page 7 Monday, June 9, 2003 2:33 PM
To Next Page
Loading...
Need help?
General