HP PROCURVE 2520 Planning And Implementation Guide

10-4
Planning and Implementation for the 5400zl/8200zl Switches
Planning Your PoE Configuration
Planning and
Implementation for the
5400zl/8200zl Switches
Power Configuration for HP ProCurve 5406zl/8206zl
PoE/PoE+ Switches
Note Using PoE power supplies J8712A and J8713A with J9306A in PoE/PoE+
systems is NOT supported. Use the J9306A zl power supply for systems
providing both PoE and PoE+ power.
Table 10-4 shows the maximum PoE/PoE+ power available for various power
configurations.
Table 10-4. 5406zl/8206zl Power Configurations for PoE/PoE+
Mixed PoE Power
(NOT Recommended))
1 1 N+1 System and Redundancy -
up to 273 W, see page 10-
13
1173 W
(With External Power
Supplies Added>
3 0 N+1 Up to 546 W 819 W
4 0 Full Up to 546 W 1092 W
0 3 N+1 Up to 1800 W 2700 W
0 4 Full Up to 1800 W 3600 W
Switch Model 5406zl/
8206zl
Number of Power Supplies Redundancy Model Non-Redundant
Power Available
J8712A
(110 or 220 volts)
J8713A
(220 volts only)
N + 1
or
Full
Redundant PoE Power Non-Redundant
PoE Power
Switch Model 5406zl/
8206zl
Number of Power Supplies
J9306A
Redundancy Model Non-Redundant
Power Available
@ 110 - 127 V @ 200-240 V N + 1 or
Full
Redundant PoE/PoE+
Power
Non-Redundant
PoE/PoE+ Power
PoE/PoE+ Power
(54v) Internal
10-None 300 W
2 0 Full Up to 300 W 600 W
01-None 900 W
0 2 Full Up to 900 W 1800 W

HP PROCURVE 2520 Specifications

General

Brand	HP
Model	PROCURVE 2520
Category	Software
Language	English