HP ProLiant ML150 Generation 2 User Manual

Removal and Replacement Procedures
2-22 HP ProLiant ML150 Generation 2 Server Maintenance and Service Guide
HP CONFIDENTIAL Codename: Stone Soup 2 Part Number: 368148-003 Last Saved On: 6/10/05 4:28 PM
SCSI Hot-Plug Hard Drive Blank Carrier
NOTE: The server does not need to be powered off to complete this operation.
To remove the SCSI hot-plug hard drive blank carrier:
1. Open the bezel door. Refer to “Bezel Door” earlier in this chapter.
2. Locate the desired hard drive blank carrier. Hold the handle and slide the blank carrier
out of the drive bay.
Figure 2-21: Removing the SCSI hot-plug hard drive blank carrier
To replace the SCSI hot-plug hard drive blank carrier, reverse steps 1 through 2.

HP ProLiant ML150 Generation 2 Specifications

General

Brand	HP
Model	ProLiant ML150 Generation 2
Category	Server
Language	English