Installing Print Services for NetWare
Refer to the previous section “Installing Services for Netware”forinformationoninstallingPrintServices
for NetWare.
Point and Print from Novell to Windows Server 2003
Point-and-Print behavior from Novell clients to Windows Server 2 0 03 and Windows Storage Server
2003 is similar to the behavior for Windows 95, Windows 98, and Windows Millennium Edition
clients, beca
use all these clients create SMB connections. However, the non–Windows operating systems
maintain their own driver m o d el, so these clients d o not automatically get the driver during Point and
Print—they must install the driver locally. Like the Windows 95 , Windows 98, and Windows Millennium
clients, the
se non–Windows clients do not receive driver updates from the print server after a driver is
initially downloaded. The same connection methods are available: drag and drop, the Add Printer
Wizard, referencing a UNC path, or double-clicking the shared printer icon.
Additional resources
For more information about using and configuring File and P rint Ser vices for NetWare, refer to the
online help.
AppleTalk and file services for Mac intosh
The AppleTalk network integration allows the storage ser ver to share files and printers bet ween your
server and a ny Apple Macintosh clients that are connected to your network. After installing Microsoft
Windows Services for Macintosh, the administrator can use the AppleTalk protocol to configure the
storage server to act as an AppleTalk server. The AppleTalk protocol is the communications protocol used
by client
s running a Macintosh operating system. The Macintosh computers need only the Macintosh OS
software
to function as clients; no additional software is required.
AppleTalk network integration simplifies administration by maintaining just one set of user accounts
instead of separate user accounts, for example, one on the Macintosh server and another on the
computer running Windows server software.
Installing the AppleTalk protocol
1. From the desktop of the storage server, select Start > Settings > Network Connections.Right-click
Local Area Connection, and then click Properties.
2. Click Install.
Figure 46 is an example of the Select Network component.
Figure 46 Local Area Connec t ion Properti es pag e , Install option
3. Select Protocol, and then click Add.
4. Select AppleTa lk Protocol, and then click OK.
HPProLiantML350G5StorageServer
105
To Next Page
Loading...
Need help?
General
