NOTE:
The ACU is used to configure and manage array-based storage. Software RAID-based storage servers
use Microsoft Disk Manager to manage storage. You need ad mi nistrator or root privileges to run the
ACU.
Arr ay Configuration Utility
The H P ACU supports the Smart Array controllers and SCSI h a rd drives installed on the storage server.
To o pen the ACU from the storage server desktop:
NOTE:
If this is the first time that the ACU is being run, you will be prompted to select the Execution Mode for
ACU. Selecting Local Application Mode allows you to run the ACU from a Remote Desktop, Remote
Console, or storage server web access modes. Remote Service Mode allows you to access the ACU
from a remote browser .
1. Select Star t > Programs > HP Manag em ent Tools > Array Configuration Utility.
2. If the Execution Mode for ACU is set to Remote Mode, log in to the HP System Management
Homepage. The default user name is administrator and the default password is hpinvent.
To open the ACU in browser mode:
NOTE:
Confirm that the ACU Extension Mode is set to r emote service.
1. Open a browser and enter the server name or IP address of the destination server. For example,
http://ser vername:2301 or http://192.0.0.1:2301.
HPProLiantML350G5StorageServer 45
To Next Page
Loading...
Need help?
General
