HP ProLiant ML350 G5 User Manual

5. Click OK to accept the team properties.
6. Click OK in the HP Network Configuration Utility Properties dialog box to apply the changes.
Team Properties page
The Team Properties page is displayed (see Figure 50) when the Properties tab is selected on the HP
Network Configuration Utility Properties dialog box. The Team Properties page is used to manag e and
monitor all team-specific settings and consists of the following individual tabs.
Figure 50 Team Properties page
• Teamin
g Controls—This tab is used to change the team name, select team type, select the Transmit
Load B
alancing algorithm, change port preference order for NFT with Preference teams, and to
assig
n group membership for Dual Channel teams.
• Advanced Redundancy—This tab is only used when the server has a valid ProLiant Essentials
Intelligent Networking Pack (INP) license. It is used to manage Active Path, Fast Path, and monitor
Fast
Path port cost and path cost.
• Discovery Protocol—Displays the Cisco Discovery Protocol (CDP) options to enable or disable
CDPv1 and CDPv2. This feature is available with a valid INP license.
• Sett
ings—This tab is used to manually set the team’s Locally Administered Address (L A A) MAC
add
ress, manage heartbeat timers, and manage the team-level advanced property settings (for
exa
mple, max frame size, checksum offload ing, Large Send Offload, and so on).
• VLAN—This tab is used for assigning a team to one or more VLANs. It is also used to manually
choose which V LANs to use for the default/native VLA N, VLAN for receive path validation
(heartbeats) , Active Path VLAN, and Fast Path V LAN (if PVST+ is selected for Fast path).
HPProLiantML350G5StorageServer
113

HP ProLiant ML350 G5 Specifications

General

Brand	HP
Model	ProLiant ML350 G5
Category	Network Storage Server
Language	English