HP SN3000B User Manual

Fabric OS Administrator’s Guide 201
53-1002446-01
Firmware download from a USB device
9
Slot 7 (CP1, active): Firmware has been downloaded to the secondary partition
of the switch.
[5]: Mon Mar 22 04:37:24 2010
Slot 7 (CP1, standby): The firmware commit operation has started. This may
take up to 10 minutes.
[6]: Mon Mar 22 04:41:59 2010
Slot 7 (CP1, standby): The commit operation has completed successfully.
[7]: Mon Mar 22 04:41:59 2010
Slot 7 (CP1, standby): Firmwaredownload command has completed successfully.
Use firmwareshow to verify the firmware versions.
11. Enter the firmwareShow command to display the new firmware versions.
Firmware download from a USB device
The Brocade 300, 5100, 5300, 6505, 6510, 7800, 8000, and VA-40FC switches and the Brocade
DCX, DCX-4S, or DCX 8510 Backbones support a firmware download from a Brocade branded USB
device attached to the switch or active CP. Before the USB device can be accessed by the
firmwareDownload command, it must be enabled and mounted as a file system. The firmware
images to be downloaded must be stored under the relative path from
/usb/usbstorage/brocade/firmware or use the absolute path in the USB file system. Multiple
images can be stored under this directory. There is a firmwarekey directory where the public key
signed firmware is stored.
When the firmwareDownload command line option,
-U (upper case), is specified, the
firmwareDownload command downloads the specified firmware image from the USB device. When
specifying a path to a firmware image in the USB device, you can only specify the relative path to
/firmware or the absolute path.
Enabling USB
1. Log in to the switch using an account assigned to the admin role.
2. Enter the usbStorage -e command.
Viewing the USB file system
1. Log in to the switch using an account assigned to the admin role.
2. Enter the usbStorage -l command.
BrcdDCXBB:admin> usbstorage –l
firmware\ 381MB 2010 Mar 28 15:33
v7.0.0\ 381MB 2010 Mar 28 10:39
config\ 0B 2010 Mar 28 15:33
support\ 0B 2010 Mar 28 15:33
firmwarekey\ 0B 2010 Mar 28 15:33
Available space on usbstorage 79%

HP SN3000B Specifications

General

Brand	HP
Model	SN3000B
Category	Switch
Language	English