60 Fabric OS Administrator’s Guide
53-1002446-01
Configuring FLOGI-time handling of duplicate PWWN
3
4. Enter the auditCfg --show command to view the filter configuration and confirm that the
correct event classes are being audited, and the correct filter state appears (enabled or
disabled).
switch:admin> auditcfg --show
Audit filter is enabled.
2-SECURITY
4-FIRMWARE
5. Issue the auditDump -s command to confirm that the audit messages are being generated.
Example of the syslog (system message log) output for audit logging
Oct 10 08:52:06 10.3.220.7 raslogd: AUDIT, 2008/10/10-08:20:19 (GMT),
[SEC-3020], INFO, SECURITY, admin/admin/10.3.220.13/telnet/CLI,
ad_0/ras007/FID 128, , Event: login, Status: success, Info: Successful login
attempt via REMOTE, IP Addr: 10.3.220.13.
Oct 10 08:52:23 10.3.220.7 raslogd: 2008/10/10-08:20:36, [CONF-1001], 13, WWN
10:00:00:05:1e:34:02:0c | FID 128, INFO, ras007, configUpload completed
successfully. All config parameters are uploaded.
Oct 10 09:00:04 10.3.220.7 raslogd: AUDIT, 2008/10/10-08:28:16 (GMT),
[SEC-3021], INFO, SECURITY, admin/NONE/10.3.220.13/None/CLI, None/ras007/FID
128, , Event: login, Status: failed, Info: Failed login attempt via REMOTE, IP
Addr: 10.3.220.13.
Configuring FLOGI-time handling of duplicate PWWN
Fabric OS has two configurable options for handling duplicate PWWN conflicts occurring on the
same switch.
• Existing login takes precedence over second login (default behavior).
• Second login overrides existing login (optional behavior).
Table 8 shows details of the default behavior. Table 9 shows details of the optional behavior.
TABLE 8 Duplicate PWWN behavior: Existing login takes precedence over second login
Input port Duplicate found on
same F_Port
Duplicate found on different
F_Port
Duplicate found on same
NPIV port
Duplicate found on
different NPIV port
FLOGI
received
1 Implicit logout.
2 Send FLOGI ACC.
1Send FLOGI RJT.
2RASLog Duplicate
Found.
3 Persistently disable
input port.
N/A 1 Send FLOGI RJT.
2RASLog Duplicate
Found.
3 Persistently
disable input port.
FDISC
received
N/A 1 Send FDISC RJT.
2RASLog Duplicate
Found.
Send FDISC ACC with
previously assigned
PID.
1Send FDISC RJT.
2RASLog Duplicate
Found.
To Next Page
Loading...
Need help?
General