Fabric OS Administrator’s Guide xxxv
53-1002446-01
The following hardware platforms are supported by this release of Fabric OS:
• Fixed-port switches:
- Brocade 300 switch
- Brocade 5100 switch
- Brocade 5300 switch
- Brocade 5410 embedded switch
- Brocade 5424 embedded switch
- Brocade 5450 embedded switch
- Brocade 5460 embedded switch
- Brocade 5470 embedded switch
- Brocade 5480 embedded switch
- Brocade 6505 switch
- Brocade 6510 switch
- Brocade 7800 extension switch
- Brocade 8000 FCoE switch
- Brocade VA-40FC
- Brocade Encryption Switch
• Brocade DCX Backbone family:
- Brocade DCX
- Brocade DCX-4S
• Brocade DCX 8510 Backbone family:
- Brocade DCX 8510-4
- Brocade DCX 8510-8
What’s new in this document
Information that was modified:
• Support for new platforms:
- Brocade 6505 switch
- FC8-32E port blade
- FC8-48E port blade
• Added information about duplication PWWN detection. (Refer to “Duplicate Port World Wide
Name” on page 13 and “Configuring FLOGI-time handling of duplicate PWWN” on page 60.
• Added Enterprise ICL license for connecting more than four Brocade DCX 8510 Backbones
with ICLs. (Refer to Chapter 18, “Administering Licensing” on page 367.)
• Connectivity between Fabric OS and Brocade Network OS fabrics through FC-FC routing. (Refer
to Chapter 24, “Using FC-FC Routing to Connect Fabrics,” on page 465.)
• Moved the ICL and ICL trunking information to a new chapter, Chapter 19, “Inter-chassis
Links,” on page 393.
To Next Page
Loading...
Need help?
General