To Next Page

To Previous Page

Fabric OS Administrator’s Guide 349

53-1002446-01

Admin Domain management for physical fabric administrators

Creating a new user account for managing Admin Domains

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the userConfig

--add command using the -r option to set the role, the -a option to

provide access to Admin Domains, and the -h option to specify the home Admin Domain.

userconfig --add username -r role -h home_AD -a "AD_list"

Example of creating new user accounts

The following example creates new user account ad1admin with an admin role and assigns

one Admin Domain, blue_ad1, to it. This example also assigns blue_ad1 as the user’s home

Admin Domain.

switch:admin> userconfig --add ad1admin -r admin -h blue_ad1 -a "blue_ad1"

The following example creates new user account ad2admin with an admin role, access to

Admin Domains 1 and 2, and home Admin Domain set to 2.

switch:admin> userconfig --add ad2admin -r admin -h 2 -a "1,2"

Assigning Admin Domains to an existing user account

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the userConfig

--addad command using the -a option to provide access to Admin

Domains and the -h option to specify the home Admin Domain.

userconfig --addad username -h home_AD -a "AD_list"

Example

The following example assigns Admin Domain green_ad2 to the existing user account

ad1admin.

switch:admin> userconfig --addad ad1admin -a "green_ad2"

Creating a physical fabric administrator user account

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the userConfig

--add command using the -r option to set the role to admin and the -a

option to provide access to Admin Domains 0 through 255.

userconfig --add username -r admin -h home_AD -a "0-255"

Example

The following example creates new user account pfa_admin1 with an admin role, access to all

Admin Domains (AD0 through AD255), and home Admin Domain set to 255. This user account

is now a physical fabric administrator.

switch:admin> userconfig --add pfa_admin1 -r admin -h 255 -a "0-255"

HP SN3000B User Manual

Other manuals for HP SN3000B