EasyManuals Logo

HP zbook 15 G3 User Manual

HP zbook 15 G3
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #141 background imageLoading...
Page #141 background image
Hard drive/solid-state drive not recognized
Symptom
Hard drive is not recognized during
POST
Possible causes
Loose connection, faulty hard drive, faulty drive conguration/BIOS setting.
Troubleshooting steps
1. Perform a hard reset (8. Hard reset on page 89).
2. Reset BIOS to default.
3. Verify hard drive connection and ex cable. Reseat hard drive and cable connection. For
multiple storage devices, keep the primary drive with the operating system and remove
other devices.
4. Use the HP Hardware Diagnostics tool to verify the drive is recognized and test it.
5. If the hard drive fails diagnostics, record failure and have the drive replaced.
6. Identify when the issue is related to software. If the hard drive passes diagnostics, test
the drive on a veried working computer. If the failure follows the drive, reinstall the
operating system to make sure software is not an issue.
7. Test with a veried working hard drive. If it is still not recognized, the system board is
faulty.
NOTE: If the drive is seen in BIOS and Diagnostics, try a secure erase prior to replacing a
drive as this may resolve related issues.
No boot to operating system (no read/write error)
Symptoms
Post error message: Boot Device
not found (3F0)
Hang when booting to operating
system
Possible causes
Operating system, loose connection, faulty hard drive, BIOS conguration, Secure Boot.
Troubleshooting steps
1. Verify if Secure Boot is enabled in BIOS. Secure Boot prevents legacy boot devices from
starting the computer, including bootable CDs and DVDs. For more information, see HP
PCs - Secure Boot (Windows 8).
2. Reset BIOS to default. Be sure that BIOS Boot Mode in Boot Option is set up properly
for bootable device and its operating system (i.e., UEFI Native for Windows 8).
Another example, choosing Legacy Boot Order for an UEFI device will cause "Boot
Device not found (3F0)" error.
3. Verify hard drive connection and ex cable. Reseat connection. For multiple storage
devices, keep the primary drive with the operating system and remove other devices.
4. Use PC Hardware Diagnostics tool to test. Record failure code and have the hard drive
replaced.
5. If there is no error, reinstall the operating system using HP Restore.
6. Test with a veried working operating system hard drive, if available.
Note If there is a hard drive POST error message, see POST Error Messages and User Actions
on page 139.
Common issues and possible solutions 129

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP zbook 15 G3 and is the answer not in the manual?

HP zbook 15 G3 Specifications

General IconGeneral
Form factorClamshell
Product typeMobile workstation
Product colorBlack
Cable lock slotYes
Country of originChina
Bus typeDMI3
SteppingR0
Tjunction100 °C
Processor cache6 MB
Processor cores4
Processor modeli7-6700HQ
System bus rate8 GT/s
Processor familyIntel® Core™ i7
Processor seriesIntel Core i7-6700 Mobile series
Processor socketBGA 1440
Processor threads8
Processor codenameSkylake
Processor frequency2.6 GHz
Processor cache typeSmart Cache
Configurable TDP-down35 W
Processor lithography14 nm
Processor manufacturerIntel
Processor front side bus- MHz
PCI Express slots version3.0
Processor boost frequency3.5 GHz
Processor operating modes64-bit
ECC supported by processorNo
PCI Express configurations1x16, 2x8, 1x8+2x4
Thermal Design Power (TDP)45 W
Maximum number of PCI Express lanes16
Memory types supported by processorDDR3L-SDRAM, LPDDR3-SDRAM, DDR4-SDRAM
Memory clock speeds supported by processor1866, 2133, 1600 MHz
Memory bandwidth supported by processor (max)34.1 GB/s
Maximum internal memory supported by processor64 GB
Motherboard chipsetIntel CM236
Pointing deviceTouchpad
Recovery operating systemWindows 10 Pro
Operating system installedWindows 7 Professional
Memory slots4x SO-DIMM
Internal memory8 GB
Memory channelsDual-channel
Memory clock speed2133 MHz
Internal memory typeDDR4-SDRAM
Memory layout (slots x size)2 x 4 GB
SSD capacityThe Solid State Drive's storage capacity in Gigabytes.
SSD interfacePCI Express
Storage mediaSSD
Total storage capacity256 GB
Compatible memory cardsSD, SDHC, SDXC
Number of SSDs installed1
Display diagonal15.6 \
Native aspect ratio16:9
On-board graphics card ID0x191B
Discrete graphics card modelNVIDIA® Quadro® M2000M
On-board graphics card modelIntel® HD Graphics 530
Discrete graphics card memory4 GB
Discrete graphics memory typeGDDR5
On-board graphics card familyIntel® HD Graphics
Maximum on-board graphics card memory1.7 GB
On-board graphics card OpenGL version4.4
On-board graphics card base frequency350 MHz
On-board graphics card DirectX version12.0
On-board graphics card dynamic frequency (max)1050 MHz
Number of displays supported (on-board graphics)3
Battery capacity90 Wh
Number of battery cells9
AC adapter power150 W
Number of built-in speakers2
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version4.0
Top Wi-Fi standardWi-Fi 5 (802.11ac)
Ethernet LAN data rates10, 100, 1000 Mbit/s
HDMI version1.4
USB 2.0 ports quantity0
Sustainability certificatesENERGY STAR
Processor codeSR2FQ
Processor ARK ID88967
Processor package size42 x 28 mm
Supported instruction setsSSE4.1, SSE4.2, AVX 2.0
Intel Smart Response Technology version1.00
Intel Stable Image Platform Program (SIPP) version0.00
Weight and Dimensions IconWeight and Dimensions
Depth264 mm
Width386 mm
Height26 mm
Weight2590 g

Related product manuals