EchoLife HG850
Service Manual 3 Service Configuration
Issue 02 (2007-05-30) Huawei Technologies Proprietary 3-3
z
In the general configuration mode, you can run all commands in the user mode and
the privilege mode.
Figure 3-1 shows the relationships between the command modes. An ellipse represents a
command mode. An arrow indicates the switching from one mode to another mode.
Commands are listed above the arrows.
Figure 3-1 Relationships between the command modes
user mode
exit
privilege
mode
advanced
configuration mode
enable
disable
configure
terminal
exit
GPON
mode
exit
GPON
To switch from the privilege mode to the general configuration mode, execute configure
terminal.
To exit from the general configuration mode and enter the privilege mode, execute exit.
3.2.3 Online Help of Command Line
The interface of command provides the following online helps.
Complete Help
Enter ? in any view, and then you can get all the commands usable under the view and the
concise descriptions of the commands.
Partial Help
z
Enter ? after a command separated by a space. If that position is a keyword, all
keywords and their concise descriptions will be listed.
z
Enter ? after a command separated by a space. If that position is a parameter, the
descriptions of all related parameters will be listed.
z
Enter ? after a character string. All the commands beginning with the character string
will be listed.
z
Add a space after a command. If that position is a keyword, the keywords of the
command will be completed.
To Next Page
Loading...
Need help?
General
