Huawei EchoLife HG850 User Manual

B SIP Service Configuration
EchoLife HG850
Service Manual
B-2
Huawei Technologies Proprietary
Issue 02 (2007-05-30)
om
<cr>|address<K>|port<K>|expire-time<K> }:
ver.com
n of command succeeded”
TERMINAL(config)#sip server 0 domain sipserver.c
{
Command:
sip server 0 domain sipser
Executio
You can configure three SIP servers for the HG850. If the HG850 fails to
register to the first SIP server, then it registers to the second SIP server. If it
fails to register to the second SIP server, it regist
z
ers to the third SIP server. The
z
f Server 2 as that of the standby server. This can
shorten the register time.
ing parameters for the SIP user:
p user 0 id 88880008 password 88880008
<cr>|name<K> }:
on will affect the user's current services. Continue?
n of command succeeded
SIP servers here can be configured from 0 to 2.
It is recommended to configure the address of Server 0 as that of the main
server and the IP address o
B.1.3 Configuring SIP User Information
Configure the follow
z
Port number: 0
z
ID: 88880008
z
Authentication password: 88880008
TERMINAL(config)#si
{
Command:
sip user 0 id 88880008 password 88880008
This operati
[Y/N]:y
TERMINAL(config)#
Executio
The HG850 can configure two SIP users, which range from 0 to 1.
ute 0
--------------------------------
********
68.100.2
red
B.1.4 Querying Configuration Result
Query the configuration result.
TERMINAL(config)#display sip attrib
Sip User Information
---------------------
user-sn : 0
id : 88880008
password :
name :
local address : 191.1
local-port : 5060
registration state : registe

Huawei EchoLife HG850 Specifications

General

Brand	Huawei
Model	EchoLife HG850
Category	Touch terminals
Language	English