Husqvarna TX 125 User Manual

15 ELECTRICAL SYSTEM
103
15.1 Removing the battery (TE 150 US)
Warning
Risk of injury Batteries contain harmful substances.
– Keep batteries out of the reach of children.
– Keep sparks and open flames away from the batteries.
– Only charge batteries in well-ventilated rooms.
– Maintain a minimum clearance from inflammable materials when charging batteries.
Minimum clearance 1 m (3 ft)
– Do not charge deeply discharged batteries if charge is already below the minimum voltage.
Minimum voltage before the start of the charge 9 V
– Dispose of batteries with less than the minimum voltage correctly.
Preparatory work
– Press and hold the kill switch while the engine is idling until
the engine stops.
– Remove the air filter box cover. ( p. 66)
– Remove the seat. ( p. 65)
H01190-10
Main work
–
Pull back the negative terminal cover
1
and disconnect
negative cable
2
from the battery.
–
Pull back the positive terminal cover
3
and disconnect pos-
itive cable
4
from the battery.
–
Remove screw
5
.
–
Pull holding bracket
6
forward and remove battery toward
the top.

Husqvarna TX 125 Specifications

General

Brand	Husqvarna
Model	TX 125
Category	Motorcycle
Language	English