12 SERVICE WORK ON THE CHASSIS
66
12.19 Mounting the seat
H02512-10
Main work
– Mount the front of the seat on the collar bushing of the fuel
tank, lower the seat at the rear, and push the seat forward.
– Make sure that the seat is locked in correctly.
–
Mount and tighten screw
1
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
Finishing work
– Install the air filter box cover. ( p. 67)
12.20 Removing the air filter box cover
H02513-10
–
Pull off the air filter box cover sideways in areas
A
,
B
and
C
, and remove toward the front.
To Next Page
Loading...
Need help?
General
