Husqvarna TX 125 User Manual

7 COMBINATION INSTRUMENT
25
401909-01
– Press and hold both buttons for 3 - 5 seconds.
The Setup menu is displayed. The UNIT display flashes.
– Press one of the buttons to select UNIT for the speed in kilo-
meters KM/H or miles M/H.
7.6 Adjusting the clock
Condition
The motorcycle is stationary.
401911-01
– Press and hold both buttons for 3 - 5 seconds.
The Setup menu is displayed. The UNIT display flashes.
– Wait for the menu of the clock to flash.
– Press one of the buttons to select the 24h or 12h display of
the clock.
401912-01
– Wait for 5 seconds.
The combination instrument changes to the next menu
item. The symbol flashes.
Resetting the time
– Press the left button.
The value decreases.
Advancing the time
– Press the right button.
The value increases.
7.7 Adjusting the service display
Condition
The motorcycle is stationary.
401913-01
– Press and hold both buttons for 3 - 5 seconds.
The Setup menu is displayed. The UNIT display flashes.
– Wait for the menu of the service display to flash.
– Adjust the service.
Shortening the service interval
– Press the left button.
The value decreases.
Extending the service interval
– Press the right button.
The value increases.

Husqvarna TX 125 Specifications

General

Displacement	124.8 cc
Bore x Stroke	54 mm x 54.5 mm
Starter	Kickstarter
Transmission	6-speed
Seat Height	960 mm
Ground Clearance	370 mm
Engine Type	Single cylinder, 2-stroke
Rear Suspension	WP XACT shock absorber with linkage
Front Brake	260 mm disc
Rear Brake	220 mm disc
Clutch	Wet, multi-disc clutch, hydraulically operated