Husqvarna TX 125 User Manual

20 STORAGE
134
Info
Do not use non-porous materials since they prevent
humidity from escaping, thus causing corrosion.
Avoid running the engine for a short time only.
Because the engine will not warm up sufficiently,
the water vapor produced during combustion will
condense, causing engine parts and the exhaust
system to rust.
20.2 Preparing for use after storage
401059-01
– Remove the motorcycle from the lift stand. ( p. 53)
(TE 150 US)
– Install the battery. ( p. 104)
– Perform checks and maintenance measures when preparing
for use. ( p. 35)
– Make a test ride.

Husqvarna TX 125 Specifications

General

Displacement	124.8 cc
Bore x Stroke	54 mm x 54.5 mm
Starter	Kickstarter
Transmission	6-speed
Seat Height	960 mm
Ground Clearance	370 mm
Engine Type	Single cylinder, 2-stroke
Rear Suspension	WP XACT shock absorber with linkage
Front Brake	260 mm disc
Rear Brake	220 mm disc
Clutch	Wet, multi-disc clutch, hydraulically operated