Husqvarna TX 125 User Manual

16 COOLING SYSTEM
115
V01001-10
–
Loosen screw
2
until coolant escapes without bubbles.
–
Mount and tighten screw
2
.
Guideline
Bleeder screw,
cylinder head
(TX 125 EU)
M6 8 Nm (5.9 lbf ft)
Bleeder screw,
cylinder head
(TE 150 US)
M6 8 Nm (5.9 lbf ft)
– Completely fill the radiator with coolant.
Coolant ( p. 150)
– Mount the radiator cap.
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
– Always make sure there is sufficient ventilation
when running the engine.
– Use an effective exhaust extraction system when
starting or running the engine in an enclosed
space.
– Allow the engine to warm up and cool down again.
– Check the coolant level. ( p. 113)

Husqvarna TX 125 Specifications

General

Displacement	124.8 cc
Bore x Stroke	54 mm x 54.5 mm
Starter	Kickstarter
Transmission	6-speed
Seat Height	960 mm
Ground Clearance	370 mm
Engine Type	Single cylinder, 2-stroke
Rear Suspension	WP XACT shock absorber with linkage
Front Brake	260 mm disc
Rear Brake	220 mm disc
Clutch	Wet, multi-disc clutch, hydraulically operated